![Nylon Protector, Block, Wear Test - image](https://drpulley.co/wp-content/uploads/2022/10/image-Nylon-Protector-Block-Wear-Test-1400x560.jpg)
Table of Contents
Nylon Protector, Block
In order to meet the quality/performance required from the marketing, Dr.Pulley devote several years of formula development and field-testing.
Now in the market, the Dr.Pulley BLOCK has the best overall properties of
- Non-abrasive to Aluminum part.
- Low friction coefficient.
- High service temperature.
- High compression resistant strength.
- High wear-resistant for both steel and Aluminum material.
The wear test produced valuable data on the comparative performance of the materials, as below:
Test Condition
The high performance engineering plastic test samples from aftermarket & UM slide against Steel and Aluminum separately, remaining all condition are same.
Constant condition
- Normal load: 40 kg.
- Testing Temp: 150℃.
- Environmental Temp. : 25 ℃.
- Humidity: 70%.
- Testing time: 100,000 stroke.
Variable Condition
- Block Item:
- aftermarket_1.
- aftermarket_2.
- UM (Block self-lubricated composite).
- Counterpart:
- Steel plate S30C.
- 6061-T6 Aluminum Alloy plate (Hardness Shore D 95/97, same as Aluminum Variator ).
Wear test with Aluminum
Counterpart is Aluminum 6061-T6
Various Block Weight Loss
Block Item | Block Weight Loss (g) |
aftermarket_1 | 0.3123 |
aftermarket_2 | 0.2185 |
UM, Block self-lubricated composite | 0.0260 |
Total Wear
Block Item | Total Weight Loss (g) |
aftermarket_1 | 0.7818 |
aftermarket_2 | 0.5143 |
UM, Block self-lubricated composite | 0.0298 |
Aluminum Weight Loss
Block Item | Aluminum Weight Loss (g) |
aftermarket_1 | 0.4695 |
aftermarket_2 | 0.2958 |
UM, Block self-lubricated composite | 0.0038 |
![wear test with Aluminum](https://drpulley.co/wp-content/uploads/2022/10/wear-test-with-Aluminum-400x400.jpg)
Wear test with Steel
Counterpart is Steel S30C
Various Block Weight Loss
Block Item | Block Weight Loss (g) |
aftermarket_1 | 0.0600 |
aftermarket_2 | 0.0481 |
UM, Block self-lubricated composite | 0.0228 |
Total Wear
Block Item | Block compression at 3mm deflection (kg) |
aftermarket_1 | 0.0623 |
aftermarket_2 | 0.0488 |
UM, Block self-lubricated composite | 0.0270 |
Steel Weight Loss
Block Item | Steel Weight Loss (g) |
aftermarket_1 | 0.0023 |
aftermarket_2 | 0.0007 |
UM, Block self-lubricated composite | 0.0042 |
![wear test with Steel](https://drpulley.co/wp-content/uploads/2022/10/wear-test-with-Steel-400x400.jpg)
Compression
Block Item | Block Compression at 3mm deflection (kg) |
aftermarket_1 | 200 |
aftermarket_2 | 185 |
UM, Block self-lubricated composite | 238 |
More Information
Our Youtube url : https://www.youtube.com/c/DrPulley
Online Shop : Primary Clutch Block