Sliding Roller Weight 25×19-8, SR2519-8, APRILIA SRV850

 
The choices you make,
make you.
 

Still struggling choosing initial acceleration or higher top end when tuning your vehicle?
Well, why choosing one over the other?
Now you can have both, with Dr.Pulley patented sliding roller weight (SR).

Here we need to talk about something technical.

There are two crucial factors that make a SR work: Dimension and Material.

First, the calculated design makes SR startup with more power, so you get greater acceleration.
And then the design is able to open the variator wider, push the belt out further, and get you to a higher top end speed.

Next, and yet the most important, produce SR with our special formulated material.  The key to ensure
– faster movement (low friction coefficient),
– better wear resistant (bearing grade material), and
– more protection to your variator (non-abrasive fiber)
is in your hands.

Now, combine these two magical factors, and we have the sliding roller weight created and handed to you.

In short, the fastest way to improve your vehicle performance is right here.
What are you waiting for?

Remember

Never use any fake SR on the market, as SR won’t work without our premium material.
In the worst case scenario, those fake products not only just don’t work; but most likely, they will scratch your variator badly.
Nobody wants to waste a whole variator set because of using a bad set of rollers. So, don’t try it.

In order to bring you the best result for tuning, we use high-level alloys in our Dr.Pulley SR and RR.
The copper and aluminum alloys we use allow us to provide you a higher accuracy on the weight you choose.

Introduction

➔ Material
➔ Sliding Roller Weight
➔ Setting Direction of Weight Rollers
 
➔ How to choose the right weight for roller weights
➔ What is the effect of the burrs on the Ramp Plate? Weight Rollers life
➔ CVT Acceleration Curves – Basic Concept
 

Dimension

Sliding Roller Weight 25×19-8, SR2519-8

Sliding Roller Weight	A	B
	*Outside Dia.	Height
mm	25	19
inch	0.98	0.75

*Outside Dia. equivalent to Round Roller Weight.

Packaging

Sliding Roller Weight 25×19-8, SR2519-8

Remark:

Even with the same model name, vehicles may still be different in different areas or countries.
Models listed are for reference. Please check with your technician before purchasing.

Social Media

• Facebook
• Youtube
• Official LINE

Sliding Roller Weight 25×19-8, SR2519-8

Applicable Models (For Reference Only)

Year→ = After this Year. For example: 2022→
→Year = Before this Year. For example: →2022
Year→Year = From Year to Year. For example: 1980→2022
Your scooter model year is the year it was manufactured.
(Note: it is not when you bought it, but when it was made.)

Relevant question:

• Where are the applicable models for the parts?
• What if I do not find my vehicle model in the List?

Applicable Models (For Reference Only)

Relevant question:

• Where are the applicable models for the parts?
• What if I do not find my vehicle model in the List?