Replace Slide Piece Honda Activa 125 - image cover

Replace Slide Piece, Honda Activa 125, SCV125

Table of Contents

Disassemble

It’s easier to remove the Slide Pieces from Ramp Plate using your fingers strength

Replace Slide Piece Activa 125 - Product

Dr.Pulley Material

High Performance Material

Dr.Pulley SP-AS that replace OEM parts number 22011-K24-900 have better duability, There are a little benefits below:

Low Friction
Non Abrasive
Strong Wear Resistance
Aluminium Friendly

Learn More

Replace Slide Piece Activa 125 - Slightly sway under pressing

Assemble

There are a bit of gists for assemble:

Simple way is the Curve against the curve,
Further pushing with your thumb finger, or as one example, pressing the Ramp Plate with the hard flat something like iron block, and then could slightly sway it under pressing.

Check

You should inspect their movement whether still excessive resistance as up and down before you ready go to put on Variator Set to the vehicle. Simulating Scooter’s acutally situation, having to assemble relative parts are Variator Boss and Weight Rollers, put it on with the Variator (Moveable drive variator), we recommend the way to do, and then check the Slide Piece movement by try to move or push up the Variator Boss from its bottom.

Notice

if you have our Dr.Pulley’s products from Sliding Roller Weight, be watch out when checking process, when you check it by moving the Ramp Plate as up and down, the Sliding Roller Weight easy flip out or not back to initial position of lowest point, therefore, making sure correct the setting, and tightly cramp the Ramp Plate and the Variator in order to avoid the Sliding Roller Weight wrong position at the moment until fix to on the Engine drive axis.