Sliding Roller Weight 26x13W-8, SR2613W-8, SUZUKI AN400

Sliding Roller Weight 26x13W-8, SR2613W-8, SUZUKI AN400

 
The choices you make,
make you.
 

Still struggling choosing initial acceleration or higher top end when tuning your vehicle?
Well, why choosing one over the other?
Now you can have both, with Dr.Pulley patented sliding roller weight (SR).

Here we need to talk about something technical.

There are two crucial factors that make a SR work: Dimension and Material.

First, the calculated design makes SR startup with more power, so you get greater acceleration.
And then the design is able to open the variator wider, push the belt out further, and get you to a higher top end speed.

Next, and yet the most important, produce SR with our special formulated material.  The key to ensure
– faster movement (low friction coefficient),
– better wear resistant (bearing grade material), and
– more protection to your variator (non-abrasive fiber)
is in your hands.

Now, combine these two magical factors, and we have the sliding roller weight created and handed to you.

In short, the fastest way to improve your vehicle performance is right here.
What are you waiting for?

 

 

Remember

Never use any fake SR on the market, as SR won’t work without our premium material.
In the worst case scenario, those fake products not only just don’t work; but most likely, they will scratch your variator badly.
Nobody wants to waste a whole variator set because of using a bad set of rollers. So, don’t try it.

In order to bring you the best result for tuning, we use high-level alloys in our Dr.Pulley SR and RR.
The copper and aluminum alloys we use allow us to provide you a higher accuracy on the weight you choose.

 

Introduction

Sliding Roller Weight ➔ https://drpulley.co/sliding-roller-weight/
Setting Direction of Weight Rollers ➔ https://drpulley.co/setting-direction-of-weight-rollers/
How to choose the right weight for roller weights ➔ https://drpulley.co/how-to-choose-the-right-weight-for-roller-weights/

 

Dimension

Sliding Roller Weight 26x13W-8, SR2613W-8

 

Packaging

Sliding Roller Weight 26x13W-8, SR2613W-8

 

Remark:

Even with the same model name, vehicles may still be different in different areas or countries.
Models listed are for reference. Please check with your technician before purchasing.

 

Applicable Models (For Reference Only)

Sliding Roller Weight 26x13W-8, SR2613W-8

Year→ = After this Year. For example: 2022→
→Year = Before this Year. For example: →2022
Year→Year = Between. For example: 1980→2022
If the Year remains a blank on the list, perhaps it means still be uncertain of year.

Relevant question:

• Where are the applicable models for the parts?
• What if I do not find my vehicle model in the List?

Make	Model	Cc.	Year	Weight Recommended (g)
BENELLI	Velvet Dusk 400 (Suzuki)	400	2003→	15
BENELLI	Velvet Dusk 400 4T LC	400		17
MALAGUTI	Madison 250 (Piaggio)	250	1999→	15
MALAGUTI	Madison K 400	400	2002	16
SUZUKI	Burgman 400	400	1999→2002	19
SUZUKI	Burgman 400 K3	400	2003→2006	19
SUZUKI	Burgman 400 K6	400	2003→2006	19
SUZUKI	Burgman 400 K7	400	2007→2009	19
SUZUKI	Burgman 400 K8	400	2007→2009	19
SUZUKI	Burgman 400 K9	400	2007→2009	19
SUZUKI	Burgman 400 L0	400	2010→	19
SUZUKI	Burgman 400 L1	400	2010→	19
SUZUKI	Burgman 400 L2	400	2010→	19
SUZUKI	Burgman 400 L3	400	2010→	19
SUZUKI	Burgman 400 L4	400	2010→	19
SUZUKI	Burgman 400 L5	400	2010→	19
SUZUKI	Burgman 400 L6	400	2010→	19
SUZUKI	Burgman 400 L8	400	2010→	19
SUZUKI	Burgman 400 X	400	2003→2006	19
SUZUKI	Burgman K 7 400 ie 4T LC	400		17
SUZUKI	Burgman K 8 400 ie 4T LC	400		17
SUZUKI	Burgman K 9 400 ie 4T LC	400		17
SUZUKI	Burgman K10 400 ie 4T LC	400		17

Dr.Pulley tuning parts are for racing or performance purpose only. Unawareness of use may cause serious danger. Please ask a professional technician to install these products. In no event shall our company be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products.