Sliding Roller Weight 29×18-8, SR2918-8, Dr.Pulley Variator

 
The choices you make,
make you.
 

Still struggling choosing initial acceleration or higher top end when tuning your vehicle?
Well, why choosing one over the other?
Now you can have both, with Dr.Pulley patented sliding roller weight (SR).

Here we need to talk about something technical.

There are two crucial factors that make a SR work: Dimension and Material.

First, the calculated design makes SR startup with more power, so you get greater acceleration.
And then the design is able to open the variator wider, push the belt out further, and get you to a higher top end speed.

Next, and yet the most important, produce SR with our special formulated material. The key to ensure
– faster movement (low friction coefficient),
– better wear resistant (bearing grade material), and
– more protection to your variator (non-abrasive fiber)
is in your hands.

Now, combine these two magical factors, and we have the sliding roller weight created and handed to you.

In short, the fastest way to improve your vehicle performance is right here.
What are you waiting for?

 

 

Remember

Never use any fake SR on the market, as SR won’t work without our premium material.
In the worst case scenario, those fake products not only just don’t work; but most likely, they will scratch your variator badly.
Nobody wants to waste a whole variator set because of using a bad set of rollers. So, don’t try it.

In order to bring you the best result for tuning, we use high-level alloys in our Dr.Pulley SR and RR.
The copper and aluminum alloys we use allow us to provide you a higher accuracy on the weight you choose.

 

Introduction

➔ Material
➔ Sliding Roller Weight
➔ Setting Direction of Weight Rollers
 
➔ How to choose the right weight for roller weights
➔ What is the effect of the burrs on the Ramp Plate? Weight Rollers life
➔ CVT Acceleration Curves – Basic Concept
 

 

Match

Sliding Roller Weight 29×18-8, SR2918-8

It can be matched

• Over Range Variator Kit 291801, EV291801
• Over Range Variator Kit 291802, EV291802
• Over Range Variator Kit 301800, EV301800
• Over Range Variator Kit 301801, EV301801
• Over Range Variator Kit 301802, EV301802

 

Dimension

Sliding Roller Weight 29×18-8, SR2918-8

 

Packaging

Sliding Roller Weight 29×18-8, SR2918-8

 

Remark:

Even with the same model name, vehicles may still be different in different areas or countries.
Models listed are for reference. Please check with your technician before purchasing.

 

Social Media

• Facebook
• Youtube
• Official LINE

 

Applicable Models (For Reference Only)

Sliding Roller Weight 29×18-8, SR2918-8

Year→ = After this Year. For example: 2022→
→Year = Before this Year. For example: →2022
Year→Year = Between. For example: 1980→2022
If the Year remains a blank on the list, perhaps it means still be uncertain of year.

Relevant question:

• Where are the applicable models for the parts?
• What if I do not find my vehicle model in the List?

Make	Model	Cc.	Year
YAMAHA	for Dr.Pulley Variator 301801 [TMAX 530]	530

 

[hfcm id="5"]

Applicable Models (For Reference Only)

Sliding Roller Weight 29x18-8, SR2918-8

Year→ = After this Year. For example: 2022→
→Year = Before this Year. For example: →2022
Year→Year = Between. For example: 1980→2022
If the Year remains a blank on the list, perhaps it means still be uncertain of year.

Relevant question:

• Where are the applicable models for the parts?
• What if I do not find my vehicle model in the List?

Make	Model	Cc.	Year
YAMAHA	TMAX 530 [Dr.Pulley Variator 301801]	530

[hfcm id="6"]

Dr.Pulley tuning parts are for racing or performance purpose only.

Unawareness of use may cause serious danger.
Please ask a professional technician to install these products.

In no event shall our company be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products.